Mitsubishi Electric MELDAS 600M Series Instruction Manual page 102

(3) Randomly changing the display scale 1 (Using the
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
2. Monitor (Operation) Screens
1)
Press the menu key
Display range .
2)
Change the size of the figure.
–
Press the + or key to
adjust the scale.
To reduce the figure:
Press the + key.
The scale value increases.
The frame is displayed with
a dotted line.
To enlarge the figure:
–
Press the key.
The scale value decreases.
The frame is displayed with
a solid line.
3)
Press the key.
INPUT
(Note 1) The scale value increments or decrements by approx. 5% each time the
–
key is pressed.
(Note 2) The scale value can be changed within the range of 0.100 to 9999.999.
search engine
–
+ and keys)
A white frame indicating the display range appears on
the screen, and the menu for changing the display
range appears.
The size of the white frame changes according to the
key operation.
The current graphics display is erased, and a screen
with the new scale value appears. Drawing resumes
from the current position.
I – 87
+
key or