Table of Contents
Advertisement
2.4 Operation Search screen
In this screen, the program (program No.) to be automatically run, the program start position (sequence
No., block No.) can be designated, and the program can be called out from the storage place such as the
memory.
This screen is also used to designate the position to execute compare stop.
1. Device and
directory after
search
2. Search position
3. Compare stop
position
4. Buffer display
(1) Display items
1. Device and directory
after search
2. Search position
3. Compare stop
position
4. Buffer display
5. Device name and
directory setting
columns
6. Search position
setting columns
7. List of directories and
files
Downloaded from
ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
2. Monitor (Operation) Screens
Display item
This displays the device and directory where the searched machining
program is located.
This displays the searched program position (program No., sequence
No., block No.).
This displays the program position to carry out compare stop.
This display is cleared when the program stop is ended, when the NC is
reset, or when canceled.
This displays the contents of the currently executed or searched
machining program.
The block being executed is highlighted.
This displays the device name and directory designated when the
program was selected.
This sets the program No. (O), sequence No. (N) and block No. (B) of the
program to be searched.
This displays a list of the contents contained in the device or directory
displayed at item 5.
To update the list contents, press the menu key. To scroll the list, use the
This list will not appear when the screen is changed.
When the operation parameter "List comment type" is set and the HD
(DS), FLD or IC card list is displayed, the date of file creation, file size or
machining program comment will display at the <Comment> field.
search engine
and
keys.
I – 46
Details
5. Device name
and directory
setting columns
6. Search position
setting columns
7. List of directories
and files
Advertisement
Table of Contents
