Mitsubishi Electric MELDAS 600M Series Instruction Manual page 301

5.7.2 Selecting the sampling data
(1) Data setting format and data type menus
When the Data type menu key is pressed, the data type submenu will appear. When the data
type (Servo ax data, Spindle data, Auxiliary ax data and Other data) menu is selected, the
sampling data items will appear on the menu.
The setting details for the sampling data differ according to the type.
Axis name
Spindle name S + No. (No. can
be omitted for Spindle 1)
File No./Sub-program ID/
Item No./Data No.
The following items will appear on the submenu.
Menu
Servo
ax data
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Setting format
The menu of the data related to the servo axis appears.
The servo position command of the designated
Posn
command
axis is registered as the data.
The servo droop of the designated axis is
Droop
registered as the data.
The feedback position of the designated axis is
FB posn
registered as the data.
The speed feedback of the designated axis is
Speed
FB
registered as the data.
The current feedback of the designated axis is
Current
FB
registered as the data.
The cycle counter of the designated axis is
Cycle
counter
registered as the data.
The position command after smoothing of the
Smooth
posn
designated axis is registered as the data.
The program coordinate value of the
Program
posn
designated axis is registered as the data.
The machine coordinate value of the
Machine
posn
designated axis is registered as the data.
search engine
5. Diagnosis Screens
Setting example
(2) Setting the servo ax data
X, X2, etc.
(Note) The auxiliary axis data is set in
S, S2, etc. (3) Setting the spindle data
101/1/1/2 (4) Setting the NC file
Details
I – 286
Setting method reference
the same manner.
Type Reference
C
A
A
A
A
A
A
A
A
A
−
(2)