Mitsubishi Electric MELDAS 600M Series Instruction Manual page 252

4.1.3 Creating MDI data
(1) Operation method
(2) Registering an MDI program
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1)
Press the menu key
Area change , and select the
usage area.
2)
Press the menu key
3)
Edit the MDI program.
(Note 1) An MDI program can be registered in the machining program area. Refer to "(2)
Registering a MDI program" for details on the registration method.
(Note 2) Before starting MDI operation, confirm that the MDI settings are completed. If
"Editing" or "MDI no setting" is displayed, the MDI operation cannot be started.
When the
INPUT
message "MDI search complete" will appear. The setting will then be completed.
If the cursor is moved without editing, the block indicated by the cursor will be
searched for when the
1)
Press the menu key
MDI regist .
2)
Set the number of the
program to be registered, and
press the key.
INPUT
search engine
4. Edit Screens
The selected program is displayed from the head. The
.
MDI
cursor moves to the head character of the program.
The mode enters the overwrite mode.
Refer to "4.2 Editing operations".
key is pressed, the head block will be searched, and the
key is pressed.
INPUT
The menu is highlighted, and waits for the program No.
input.
The MDI program is registered in the memory. The
menu highlight returns to normal.
I – 237