Coordinate System Offset Screen (Coord Offset Screen) - Mitsubishi Electric MELDAS 600M Series Instruction Manual

3.2 Coordinate System Offset screen (Coord offset screen)

In this screen, it is possible to set and display all of the coordinate system offsets controlled by the
(Note)
NC.
Using the option, the number of coordinate system offset sets can be increased by 48 or 96 sets.
(Note) The G92 coordinate system offset cannot be set.
1. Coordinate
system
offset data
area
(1) Display items
1. Coordinate system
offset data area
2. Coordinate system
EXT area
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Display item
This displays the offset amount
for all axes in the workpiece
coordinate system (G54 to G59)
or the expansion coordinate
system (G54.1 Pn).
The size of the display area differs
depending on the number of
axes. A maximum of eight axes
can be displayed.
The workpiece coordinate offset data can be set with absolute values or
incremental values.
Setting range: –99999.999 to 99999.999 (mm)
This displays or sets the offset data for the external workpiece system.
search engine
3. Setup Screens
Details
Basic machine coordinate system
G55
workpiece
coordinate
system
G54 workpiece
coordinate system
I – 118
4. Absolute/Incremental
selection
5. Manual value setting
6. Counter display area
3. G92/G52 area
2. Coordinate system
EXT area
M
External workpiece
coordinate system
R
Reference point
W2
W1