Mitsubishi Electric MELDAS 600M Series Instruction Manual page 351

5.4 Handle/incremental feed magnification factor
Use the HANDLE/INCREMENTAL MAGNIFICATION switch to set the travel distance specified
when manual handle feed or incremental feed is made.
The travel distances for each axis are listed below:
(Up to 1000 can be set for handle feed.)
Handle
5.5 Handle feed axis selection
Use the HANDLE FEED AXIS SELECT switch to
select the axis moved by handle operation when the
handle mode is selected.
5.6 Manual pulse generator
In the manual handle mode, fine feed of the
machine can be made by turning the manual pulse
generator.
The manual pulse generator has 100 graduations
per revolution and outputs one pulse per graduation.
The travel distance per pulse is set by using the
HANDLE/INCREMENTAL MAGNIFICATION switch.
Downloaded from ManualsNet.com
CHAPTER 2 MACHINE OPERATIONS
5. Operation Panel Switches in Operation Mode
Incremental
1 1
10 10
100 100
1000 1000
1 5000
10 10000
100 50000
1000 100000
search engine
INCREMENTAL MAGNIFICATION
HANDLE FEED AXIS SELECT
-
II – 18
HANDLE/
HANDLE
00
+
MELDAS