Mitsubishi Electric MELDAS 600M Series Instruction Manual page 140

3. List
4. File setting column A
5. File setting column B
6. Input data
7. Comparison data
(Note 1) Depending on the device, some items are not displayed.
• Menu HD is Data server for the MELDAS610M, 630M and 650M.
• When the Ethernet parameters "#360114 Host1 no total char." to "#360414 Host 4 no total char."
are set to "1", the number of memory characters will not appear.
(Note 2) A list is not displayed when operating with an RS-232C I/F connection.
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Display item
(Note 2) This displays a contents list (directory and file name) of the directory in
the setting column (file setting column A or B) where the cursor is
currently located.
<Program> :
When "Memory" is selected for the device, this displays the file name
(program No.) of the machining programs already registered. The file
names are displayed in order from the smallest number, from 1 to
99999999. When a device other than memory is selected, this
displays the file name and directory to be included in the directory that
is set in the current setting column.
<Char>:
The size of each file (when memory is selected for the device, the
number of characters in the machining program). When directory is
selected, this displays "DIR".
<Comment> :
This displays the comment (up to 18 alphanumeric characters and
symbols) of each file.
For Ethernet files, the date and time are displayed as the comment.
When displaying the HD, FLD, DS or IC card list, the date of file
creation, file size or machining program comment will appear in the
comment field according to the operation parameter "List comment
type" setting.
This sets the device, directory, and file name of the target file for transfer,
compare, erasing, etc., operations.
When transferring, the file name of the transfer origin file is set. When
renaming, the file name before renaming is set.
When erasing, the erasing range is set.
This sets the device, directory, and file name of the target file for transfer,
compare, erasing etc., operations. When transferring, the file name of the
transfer destination file is set. When renaming, the file name after
renaming is set.
When erasing, the erasing file name is set.
This displays the data being transferred.
This displays the data being compared. If an error occurs during
comparison, the block with the error is displayed.
Device
Display item
Number of programs
registered
Remainder
Number of memory
characters
Remainder
List
search engine
3. Setup Screens
HD/
Memory RS-232C
Data server
I – 125
Details
Ethernet FLD
∗
: Displayed : Not displayed
IC card