Mitsubishi Electric MELDAS 600M Series Instruction Manual page 184

Number
36 0101
36 0102
36 0103
36 0104
36 0105
36 0106
36 0107
36 0108
36 0109
36 0110
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Name
Host1 This sets the host computer name.
host name This parameter allows the NC to easily recognize the
host computer on the network. Set the host
computer's name (name registered in
C:\windows\hosts) or the IP address.
<Setting example>
For host name : Mspc160
For IP address : 150.40.0.111
(Note) Set the host computer's TCP/IP address if
communication is not carried out correctly.
Host1 This sets the user name when logging into the host
user name computer.
Host1 This sets the password when logging into the host
password computer.
Host1 This sets the directory name of the host computer.
directory
Host1 Not used.
address
Host1 This sets the type of host computer.
host type
Host1 Not used.
NOOP
output
Host1 Not used.
ABOR
output
Host1 This sets the file name display position (nth word
Word pos: from left) of the list displayed when the ftp command
name "dir" is executed.
Refer to "2.6.1 Setting the Ethernet Parameters
(word position)".
(Note) One word designates a character string
divided by one or more spaces.
Host1 This sets the size display position (nth word from left)
Word pos: of the list displayed when the ftp command "dir" is
size executed.
Refer to "2.6.1 Setting the Ethernet Parameters
(word position)".
(Note) One word designates a character string
divided by one or more spaces.
search engine
3. Setup Screens
Details
I – 169
Setting range (units)
15 characters
(alphanumeric) or less
8 characters
(alphanumeric) or less
8 characters
(alphanumeric) or less
15 characters
(alphanumeric) or less
15 characters
(alphanumeric) or less
0 : UNIX
1 : PC (DOS)
0
0
0 to 100
0: When using UNIX
0 to 100
0: Default value