Mitsubishi Electric MELDAS 600M Series Instruction Manual page 320

Dialing
Waiting for the reply
Connecting
Transmitting∗∗∗
(None)
Waiting for dialing
(Status of
communication with
NC service)
(Status of
communication with
machine
manufacturer)
(3) Messages related to reception of the diagnosis results
Connecting
Receiving
(None)
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Message Display in message field
Do not turn the power OFF until
transmission of the diagnosis data is
completed.
Do not turn the power OFF until
transmission of the diagnosis data is
completed.
Do not turn the power OFF until
transmission of the diagnosis data is
completed.
Do not turn the power OFF until
transmission of the diagnosis data is
completed.
Press the Send menu to transmit
the diagnosis data to the machine
manufacturer. Do not turn the power
OFF during transmission.
Do not turn the power OFF until
transmission of the diagnosis data is
completed.
Connecting with NC service.
Wait for communication to end.
Connecting with machine
manufacturer.
Wait for communication to end.
Message Display in message field
Connecting with machine
manufacturer.
Wait for communication to end.
Connecting with machine
manufacturer.
Wait for communication to end.
Press the Send menu to transmit
the diagnosis data to the machine
manufacturer.
Do not turn the power OFF during
transmission.
search engine
5. Diagnosis Screens
I – 305
Details
• The diagnosis data is being
transmitted.
• The line is not connected yet in
this state.
• The line has been disconnected
once, and the system is waiting for
a connection from the machine
manufacturer.
• A connection with the machine
manufacturer is established, or
the system is connected to the
machine manufacturer.
• The diagnosis data is actually
being transmitted.
• Transmission of the diagnosis
data has completed, and the line
has been disconnected.
• The machine manufacturer is
using the line for other
communication.
• In connection standby state since
line is being used by anshin-net.
• In connection standby state since
line is being used by machine
manufacturer.
Details
• A connection with the machine
manufacturer is established.
• The diagnosis results are actually
being received.
• Reception of the diagnosis results
has completed, and the line has
been disconnected.