Changing The Counter Display - Mitsubishi Electric MELDAS 600M Series Instruction Manual

(2) Menus
expand
(Note 1) If another screen is displayed while the counter display is expanded and then the Position
(Note 2) If the counter type is changed while the counter display is expanded, the counter display will
(Note 3) If the
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Menu
This displays the submenu for changing the display
Counter
counter. At this time, the same menu as the currently
type
selected counter is highlighted.
Random values can be input in each data item of S, M,
T and B on the screen.
Manual
value
When the numeric value is input, the selected S, M, T
and B functions are executed.
This presets the counter. The counter set is executed
Counter
set
for each axis.
The counter display is expanded.
Counter
(Note) This menu is not provided with the
MELDAS610M, 630M or 650M.
This can be selected when there are seven or more
display axes in the selected system. The axis to be
displayed is changed to the 1st to 6th axis and 7th and
Next
axis
following axes.
(Note) This is displayed when there are seven axes or
more in one system.
This turns off the entire screen to prevent deterioration
Bklight
of the LCD screen, etc.
OFF
The screen reappears when any key is pressed.
This cancels the origin.
The coordinate system is shifted so the zero point of
Origin
cancel
the workpiece coordinate system matches the zero
point of the basic machine coordinate system.
This sets the origin.
Origin The coordinate system is shifted so the current
set
position becomes the zero point of the workpiece
coordinate system.
display1 screen is opened again, the expanded counter will display.
remain expanded.
key is pressed while the counter display is expanded, the expanded counter
C•B ESC
display state will not be canceled. To return to the normal counter display, press the
Counter expand key again.
search engine
2. Monitor (Operation) Screens
Details
I – 29
Type Reference
2.1.1 Changing
C the counter
display
1.5.1 Setting a
manual value
A
command
2.1.3 Presetting
A
the counter
−
B
1.5.4 Changing
the display axis
C
−
C
2.1.3 Presetting
the counter
C
2.1.3 Presetting
the counter
C