Table of Contents
Advertisement
3.8 Rotation Measurement screen
The offset (rotation center and rotation angle) of the rotation coordinate system is measured in this
screen. The measurement results can be reflected in the workpiece offset (rotation center) and
parameters ("Coordinate rotation: center coordinate" and "Coord rotation angle" machining parameters).
1. Center shift
amount
2. Rotation
measurement
counter
4. Coordinate
rotation
center angle
5. Sensor length
and diameter
6. Manual value
setting
(1) Display items
1. Center shift amount
2. Rotation
measurement
counter
3. Measurement
position counter
4. Coordinate rotation
center and angle
5. Sensor length and
diameter
6. Manual value setting
7. Guide drawing
Downloaded from
ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Display item
This displays the shift amount of the rotation coordinates.
This displays the machine position when the skip signal is read + Flow
rate + Center compensation amount
This displays the machine position + Sensor radius
Center compensation amount.
(Note) The sensor radius changes between +/- with the movement
Center : This displays the coordinates that are the center during
Angle : This displays the rotation angle during coordinate rotation.
Sensor length
Sensor diameter : This displays the diameter of the ball at the tip of the
This displays each command value of M (miscellaneous function
command value) and T (tool command value).
This plots the measurement location. "On meas" at the upper right of the
drawing appears while the TLM switch is ON.
search engine
3. Setup Screens
Details
direction.
coordinate rotation.
: This displays the length to the tip of the touch sensor.
touch sensor.
I – 194
3. Measurement
position counter
7. Guide drawing
(Note)
+ Flow rate +
Advertisement
Table of Contents
