Creating A New Machining Program; Editing A Program; Creating Mdi Data - Mitsubishi Electric MELDAS 600M Series Instruction Manual

(2) Menus
Comment
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Menu
This changes the operation target area (left area/right
area).
Area
change
The cursor appears in the valid area, and editing work
can be carried out.
This newly creates a program.
When the program No. is set and
Newly
create
the comment and program contents can be newly
created.
This edits and refers to an existing program.
When the program No. is set and
Open
the contents of the program appear in the selected
area, and can be edited.
This edits the MDI program.
MDI
When this menu key is pressed, the MDI program
appears in the selected area, and can be edited.
This saves the machining program in the NC memory.
Depending on the operation parameter "Program save
Save
file
type", the machining program may be saved with the
key.
INPUT
A list of the machining programs in the memory
appears in the area that is not selected.
List
If the basic common parameter "Fix_P" is set to 1, a
list of the Fixed cycle programs will appear.
When the line No. is set and the
Line
desig
the program data for that No. and following appear on the
screen. The cursor moves to the set No.
This copies a character string at a designated line
Line
copy
(multiple lines possible).
This inserts the copied line at the line before the
Line
paste
cursor.
This deletes the character string at the designated line
Line
clear
(multiple lines possible).
When the character string is designated and the
String
key is pressed, that character string is
INPUT
search
searched for.
If the character string to be searched for and the
character string to be replaced are separated with a "/"
String
replace
and designated, when the
replace operation takes place.
This changes the program comment. (This is valid only
when the list is active.)
The comment at the current cursor position can be
edited.
(Note 1) The comment of the editing program
edit
(left/right) cannot be changed.
(Note 2) The comment can only be 17 characters
long. Even if a comment exceeding 17
characters is input, the 18th and following
characters are cut off.
search engine
4. Edit Screens
Details
is pressed,
INPUT
is pressed,
INPUT
key is pressed,
INPUT
key is pressed, the
INPUT
I – 232
Type Reference
1.5.2 Changing
the valid area.
C
4.1.1 Creating a
new machining
A
program
4.1.2 Editing a
program
A
4.1.3 Creating
MDI data
C
4.1.2 Editing a
program
B
4.1.2 Editing a
program
B
4.2.2 Designating
a random line
A
4.2.5 Copying/
A
pasting data
C
4.2.6 Deleting
A
data
4.2.7 Searching
for character
A
strings
4.2.8 Replacing
character strings
A
−
A