Mitsubishi Electric MELDAS 600M Series Instruction Manual page 200

(7) Erasing one line of tool life management data
(8) Designating and erasing a line (multiple lines possible)
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1)
Move the cursor to the line to
be erased.
(Note) One of the following methods can be used to designate the line (Index No.).
• Using the cursor movement keys
selected.
2)
Select erase.
Menu Line clear INPUT
3)
Press the Y or INPUT
To cancel the erasing, press a key
other than and
Y INPUT
1)
Press the menu key
Line clear .
2)
Set the erasing range by
marking the first and last #
Nos. with a "/", and press
INPUT key.
122/125
INPUT
3)
Press the or
Y INPUT
To cancel the erasing, press a key
other than and
Y INPUT
(Note) If the key is pressed without setting a # No., the line at the cursor is erased.
INPUT
search engine
3. Setup Screens
The cursor appears at the data item of the selected line
(index No.).
↓ and ↑
The menu is highlighted.
A message appears to confirm the erasing.
One line of the selected life data is erased.
key.
After erasing, the next line is carried.
.
The menu is highlighted.
A message appears to confirm the erasing.
The tool life data corresponding to the designated # No.
key.
is erased, and the menu highlight returns to normal.
The next line after the erased range is carried.
.
I – 185
, move the cursor to the line to be