Mitsubishi Electric MELDAS 600M Series Instruction Manual page 253

4.1.4 Playback editing
Playback editing cannot be carried out during automatic operation or when editing is locked.
(1) Operation method
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1)
Set "320029 Playback G90"
on the Control param 2
screen.
2)
Open the program on the Edit
screen.
(Note) If the list is active, playback editing cannot be carried out.
3)
Press the menu key
Play back .
The process will end when
Play back is pressed again.
(Note) The area cannot be
changed during
playback editing.
Furthermore, the list
cannot be displayed.
4)
Move the axis in the manual
mode.
5)
Input the data such as the G
codes in the area for playback
editing.
(Note) When the C.B ESC
key is pressed, all
data in the playback
editing area will be
erased.
↑
(Note 1) When the
search engine
4. Edit Screens
G91 cannot be designated when ON. G90 cannot be
designated when OFF.
The playback movement amount is displayed in an
inactive area.
For an absolute value, the total value of the program
position and manual interrupt amount is displayed as
the playback movement amount.
For an incremental value, the default value is 0.
The axis movement amount will appear as the playback
movement amount.
For an absolute value, the total value of the program
position and manual interrupt amount is displayed as
the playback movement amount.
For an incremental value, the amount that the axis was
moved in the manual mode is added to the current
playback movement amount.
The alphanumeric characters,
input in the area for playback editing.
↓
and keys are pressed, the cursor in the left area will move.
I – 238
→ ←
and keys are