Mitsubishi Electric MELDAS 600M Series Instruction Manual page 145

(4) Designating multiple files
(5) Selecting an NC memory file other than a program
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Designating multiple serial files
Multiple serial files can be transferred, compared and erased in the file setting column A. Set as
follows in this case.
File : First file name
– : Last file name
Using a wild card
A wild card (*) can be used in the file name.
(Note) When using RS-232C, multiple files cannot be compared.
File : *
–
1)
Press the menu
.
Device select
2)
Press the menu
Memory
3)
Select the menu
Dir
4)
Press the menu
Tool offset
(Note) The file name for each directory is fixed. Refer to "3.3.10 List of file names" for the file
names.
search engine
3. Setup Screens
All files will be selected.
The following menu appears.
Memory RS232C
"Memory" appears in the device name, and the default
.
"Program" appears in the directory.
The following menu appears.
.
Program Tool
offset
The directory and file name appear.
.
I – 130
HD IC card Ethernet
Variabl Tool User
life param
FLD
Machine System
param param