Mitsubishi Electric MELDAS 600M Series Instruction Manual page 79

(2) Details displayed on screen during machining time calculation operation
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Screens displayed during and after machining time calculation
(Screen displayed when the menu key
1) The time in the "Mach time" column is displayed in the order of Hour: Minute: Second. The
value can be cumulated up to 1193:02:47.
2) The S, M, T and B displays indicate the codes these commands are issued during the time
calculation.
For M, a list of up to 16 sets can be displayed in the commanded order.
(Note 1) The calculated machining time data is held until the machining time calculation is
carried out next.
(Note 2) The S, M, T and B code data is erased at the top search and machining time
calculation continuation.
The data can also be erased by selecting Calcul cancel .
search engine
2. Monitor (Operation) Screens
MSTB history
I – 64
is pressed.)