Mitsubishi Electric MELDAS 600M Series Instruction Manual page 143

Outline of device, directory, and file name setting methods
Device
NC
memory
Device
other than
the NC
memory
The device can be selected from the submenu. (The devices that can be used will differ depending
on the specifications.)
One of the following methods can be used to designate the directory (for devices other than the NC
memory) and file name.
• Set the directory path (full path) or file name in the data setting area, and press the
• Press submenu
Notes when selecting a file
(Note 1) During directory and file name setting, the designated directory, path or file name will be
(Note 2) When a file in the NC memory other than a machining program is designated, it is not
(Note 3) When a file name is selected from the menu, it first is displayed in the data setting area.
(Note 4) When the
(Note 5) When a Fixed cycle program is designated, the basic common parameters 110007
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Dir (other than memory) and File name menu submenus
Menu
The cursor appears in the list display. The list contents
can be selected with the
When a directory is selected, the contents of the
selected directory are displayed in the list. Continued
From
list
selection is possible.
When a file name is selected, the file name is
temporarily displayed in the data setting area. When
the key is pressed again, it is fixed.
INPUT
Designation target file
• Machining program
• User macro
• Fixed cycle program
File other than the
machining program
All files
of the menu
Dir
directory or file name, and press the
A wild card ( ) can be used when selecting a file name.
set, even if it does not actually exist. This will not cause an error. Note that the previously
set directory is overwritten.
necessary to set the file name. (The file name is fixed.)
However, at this time the file name has not yet been fixed. Press the
fix the file name.
key is pressed when setting a file name, the file name in the data setting
area is erased.
"Fix_P" must be set. Select "Memory" for the device, and "Program" for the directory.
search engine
3. Setup Screens
Details
key.
INPUT
Designation method
Device Directory
Select from
the submenu
Select from Select from the
the submenu submenu
Select from Key input in the
the submenu data setting area,
and press
INPUT
Select from the list
or
File name From list
key.
INPUT
I – 128
Type Reference
A
File name
– Key input in the
data setting area,
(Default)
and press
INPUT
Select from the list
–
(Fixed)
Key input in the
data setting area,
and press
INPUT
Select from the list
INPUT
. Move the cursor to the target
key again to
INPUT
key.