Selecting The Axis - Mitsubishi Electric MELDAS 600M Series Instruction Manual

Reverse
(Note) Refer to section "5. Operations Related to Auxiliary Axis " in "CHAPTER 3 MAINTENANCE"

6.3.1 Selecting the axis

(1) Operation method
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Menu
The menu will be highlighted and forward run operation will start.
This menu cannot be selected unless the operation adjustment mode
is selected.
Handle
Manual and JOG
Normal
Rot
Incremental
The menu will be highlighted and reverse run operation will start.
This menu cannot be selected unless the operation adjustment mode
is selected.
Handle
Manual and JOG : When pressed again during reverse run the
Rot
Incremental
for details on initializing the auxiliary axis absolute position, and carrying out test operation.
1)
Press the menu key
.
Axis select
2)
Set the axis name, and press
the key.
INPUT
search engine
6. Maintenance Screens
Details
: Starting from the menu is not possible.
: When pressed again during forward run the
operation will stop.
When pressed during reverse run the operation
will stop once, and then forward run will start.
: This key is invalid when operation has started.
When stopped, the highlight will be automatically
released.
: Starting from the menu is not possible.
operation will stop.
When pressed during forward run the operation
will stop once, and then reverse run will start.
: This key is invalid when operation has started.
When stopped, the highlight will be automatically
released.
The menu is highlighted.
The system stands by for the axis name input.
The axis name and the various data details change.
456789.601
456789.601
345677.601
345677.601
345677.601
I – 316
Y
Type
C
C