Mitsubishi Electric MELDAS 600M Series Instruction Manual page 186

(1) Setting the Ethernet parameters (word position)
Confirm the word positions and set each in the Ethernet parameters with the following method.
Underlined section : Input by user. Italicized section : Differs according to user. Confirm the setting
before inputting.
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1)
Select the MS-DOS prompt
from the NC computer "Task
Manager".
2)
Using the ftp command, log
into the host computer.
ftp IP address
(Example)
c: \windows>ftp 150.46.0.16
3)
Input the user name for
logging in.
User name
(Example)
User (150.46.0.16 : (name)): m6
4)
Input the password.
Pasword
(Example)
Password : m6
5)
Display the directory list.
ftp>dir
6)
Confirm the file name
position, size display position
and <DIR> position in step 5).
7)
Log off.
ftp>by
search engine
3. Setup Screens
The MS-DOS window will appear.
Display on MS-DOS window :
Connected to 150.46.0.16
220 mspc 150 FTP server (SunOS 4.1) ready
User (150.46.0.16 : (name) :
Display on MS-DOS window :
331 Password required for m6.
Password :
Display on MS-DOS window :
230 User m6 logged in.
Display on MS-DOS window :
02-21-97 07:27PM
08-25-97 06:05PM
01-27-97 10:03AM
02-04-97 11:05AM
Word Number of
position: 1 words: 2
(Comment) (Comment)
File name position
Size display position
<DIR> display position
Word position (comment) : 1
No. of words (comment) : 2
Display on MS-DOS window :
c: \windows>
I – 171
<DIR> bin
1916 prjopn.dat
<DIR> NcPrograms
1850880 m6mmi.exe
<DIR> : 3 Size : 4 File name
position: 5
: 5
: 4
: 3