Mitsubishi Electric MELDAS 600M Series Instruction Manual page 18

10. Cursor key
11. INPUT key
12. RESET key
13. Menu keys
(2) Touch panel
When the touch panel specifications are provided, some key operations can be carried out by
directly touching the screen. In this case, the menu keys are not provided on the setting and display
unit.
The following operations can be carried out with the touch panel.
• Selection of each menu (menu keys)
• Changeover of menus (buttons on left and right ends of menu)
• Selection of screen group (function keys)
(Note 1) This specification can be selected with the MELDAS 615/635.
(Note 2) There is no difference in the screen operations when the touch panel is used or the normal
(Note 3) If the mouse is used when using the touch panel, correct operation may not take place.
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1. Operating the Setting and Display Unit
Key type Key
↑ ↓
← →
← →
INPUT
RESET
Touch panel
keys are used.
search engine
Operation
This moves the cursor up or down one when setting data in
the screen display items.
This moves the cursor one item to the left or right when
selecting data in the screen display items.
←
at cursor left end : Moves to the right end of previous
line.
→
at cursor right end: Moves to left end of next line.
This moves the data input cursor one character to the left or
right in the data setting area.
This fixes the data in the data setting area, and writes it to
the internal data. The cursor moves to the next position.
This resets the NC.
This changes the screen and displays the data.
I – 3