Workpiece Measurement Screen - Mitsubishi Electric MELDAS 600M Series Instruction Manual

3.7 Workpiece Measurement screen

The surface, width center, and hole center workpiece offsets are measured in this screen, and the offset
data is set based on those measured values.
1. Measurement
counter
2. Measurement
position counter
3. Sensor length
and diameter
4. Manual numeric
value setting
(1) Display items
Display item
1. Measurement
counter
Surface
measurement
counter
Hole
measurement
counter
Width
measurement
counter
2. Measurement
position
counter
3. Sensor length
and diameter
4. Manual
numeric value
setting
5. Guide drawing
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
This displays the values during measurement.
This counter becomes blank when setting coordinate system offset data, or
when the NC is reset.
The display format differs depending on the surface, hole or width
measurement type.
Machine position when the skip signal is read + Skip flow rate
compensation amount + Sensor radius
(Note) The skip flow rate changes between +/− with the movement direction.
Machine position when the skip signal is read + Skip flow rate
compensation amount
(Note) The skip flow rate changes between +/− with the movement direction.
Machine position when the skip signal is read + Skip flow rate
compensation amount
(Note) The skip flow rate changes between +/− with the movement direction.
Machine position + Sensor radius
compensa-tion amount
(Note) The sensor radius changes between +/− with the movement direction.
Sensor length
Sensor diameter : This displays the diameter of the ball at the tip of the touch
This displays each command value of M (miscellaneous function command
value) and T (tool command value).
This plots the measurement location to match each measurement.
"On meas" at the upper right of the drawing appears while the TLM switch is
ON.
search engine
3. Setup Screens
Details
(Note)
+ Skip flow rate + Center
: This displays the length to the tip of the touch sensor.
sensor.
I – 187
5. Guide drawing
(Note)
+ Center
(Note)
+ Center
(Note)
+ Center