Restart Search Screen - Mitsubishi Electric MELDAS 600M Series Instruction Manual

2.5 Restart Search screen

Restart search for resuming machining after being interrupted due to tool damaged, etc., is executed on
this screen. When restart search is executed, machining can be resumed while maintaining the modal up
to the restart position.
The machining time can also be calculated on this screen.
1. Device and
directory after
search
2. Restart search
position
3. Machining time
calculation
results
4. Buffer display
(1) Display items
1. Device and directory
after search
2. Restart search
position
3. Machining time
calculation results
4. Buffer display
5. Device name and
directory setting
columns
6. Manual value
command
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
2. Monitor (Operation) Screens
Display item
This displays the device and directory where the restart searched
machining program is located.
This displays the restart searched position (program No., sequence No.,
block No.).
If a subprogram is searched, those numbers also display.
This displays the machining time after calculation.
This displays the contents of the currently executed or restart searched
machining program. The block being executed is highlighted.
If a device or directory is designated during program selection, it is
displayed here.
This displays the latest command.
search engine
Details
I – 52
5. Device name
and directory
setting columns
6. Manual value
command
7. Restart search
position setting
column
8. Remaining
distance when
restart search is
completed
9. Position when
restart search is
completed