Mitsubishi Electric MELDAS 600M Series Instruction Manual page 456

2.7 Parameter-related operation messages
Password is illegal
Input the password
Paste? (Y/N)
Copy start posn and
end posn reversed
Copy range is
inadequate
Can't select
2.8 Tool-related operation messages
Designated group
already exists
Designated group does
not exist
Can't register group
Can't delete group
Input the tool number
Copy range is
inadequate
Clear not possible
Erase? (Y/N)
Create new file? (Y/N)
Downloaded from ManualsNet.com
Appendix 2. Operation Messages
Message
• The password designated for displaying the MACHINE PARAMETER
screen is illegal.
• The menu key for first displaying the MACHINE PARAMETER screen
was pressed after the power was turned ON.
• Message to confirm the operation when pasting.
[Y] or [INPUT] : Paste the data at the current cursor position.
[N]
• When the copy range was designated, a position before the start
position was designated as the end position.
• Could not find the parameter No. for the copy start position.
• A value larger than the last parameter No. was designated as the copy
end position parameter No.
→ Check the designated copy range.
• The password designated for displaying the machine parameters has
not been input.
• Display of the machine parameters was attempted on the [Param No.]
menu, but the password has not been input.
→ Press the [Machine param] menu, and input the password for
displaying the machine parameters.
Message
• An already existing group No. was designated when changing the
group No. (Tool life screen (grp))
• An already existing group No. was designated when newly creating the
group. (Tool life screen (grp list))
→ Designate a group No. that does not already exist.
• Erasing was attempted on the Tool life screen (grp list) of a group that
does not exist.
• The group registration process on the Tool life screen (grp list) failed.
• The group deletion process on the Tool life screen (grp list) failed.
• Pasting was attempted in a line that does not have a tool No. (Tool life
screen (grp)).
→ Paste in a line that has a tool No.
• Copying was attempted of a line that does not have a tool No. (Tool life
screen (grp)).
→ Copy a line that has a tool No.
• The line clear process failed. (Tool life screen (grp))
• Message to confirm the operation.
[Y] or [INPUT] : Erase the data
[N]
• Message to confirm the operation when newly creating data, files, etc.
[Y] or [INPUT] : Newly create.
[N]
search engine
CHAPTER 4 APPENDICES
: Do not paste the data.
: Do not erase the data.
: Cancel the operation.
IV – 14
Details
Details