Mitsubishi Electric MELDAS 600M Series Instruction Manual page 313

5.9.2 Placing a one-touch call
5.9.3 Setting a random telephone number
If the 1-shot No. key is pressed again after setting a random telephone number, the Notice-tel num
will change to the selected Notice-tel num (number 1 to 3).
(Note 1) If the No. 1 , No. 2 or No. 3 menu key is pressed after inputting a random number,
5.9.4 Canceling the network service warning
(Note 1) If an error occurs during communication, the network service warning message will appear.
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1)
Press the menu key Call .
2)
Press "Y" or the
key.
1)
Press the menu key
1-shot No. .
2)
Input a value.
012-345-6789 INPUT
the displayed random telephone number will be cleared. The Notice-tel num will change to
the Notice tel-num 1, 2 or 3 set on the Anshin net param.1 screen.
1)
Press the menu key
Warning cancel .
search engine
5. Diagnosis Screens
The menu will be highlighted, and the message "Carry
out one-touch call? (Y/N)" will appear.
Messages indicating the status will appear in
INPUT
sequence, and a connection to the NC service will be
established.
("Dialing" → "Connecting" → "Transmitting" →
"Connecting")
After connecting, the diagnosis data will be transmitted
to the NC service. After the diagnosis data has been
transmitted, the menu highlight will be turned OFF,
and a message from the net server will appear.
The menu will be highlighted, and the random number
setting mode will be entered. The cursor will appear at
the Notice-tel num field.
The menu highlight will turn OFF, and the telephone
number "012-345-6789" will appear at the cursor
position.
The Notice-tel num will change to the input number.
The network service warning message will be cleared
and canceled.
I – 298