Mitsubishi Electric MELDAS 600M Series Instruction Manual page 281

5.4.2 Spindle unit display items
The various data related to the spindle is monitored.
Change the display items using the
(1) Display items
Gain (1/s)
Droop (i)
Speed (r/min)
Load (%)
Amp display
Alarm
Cycle counter (p)
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Display item
This displays the status of the position loop gain.
Position loop gain :
The error of the actual machine position to the command position is
called droop. This error is proportional to command speed value.
(Command units)
This displays the actual rotation speed of motor.
This displays the motor load.
This displays the 7-segment LED of the driver.
This displays the alarms and warnings other than the amplifier display.
This displays the position within one rotation of the encoder detector. The
position is displayed within one rotation in the range of "0" to "RNG
(movement units) × 1000" using the grid point value as "0".
search engine
5. Diagnosis Screens
key and key to refer to the data.
Details
Feedrate (mm/s)
tracking delay error (mm)
I – 266