Mitsubishi Electric MELDAS 600M Series Instruction Manual page 111

2.8 Local Variable screen
The details of the local variables are displayed on this screen.
Local variables 1 to 33 are prepared for each user macro subprogram call level. Up to 33 local variable
data items are displayed on one level. A four-level configuration from level 0 to level 4 is used in page
order. When a block containing a variable command is executed, the details are overwritten.
1. Currently
executed
machining
program
2. Execution level
3. Display level
4. Variable No.
and details
(1) Display details
1. Currently executed
machining program
2. Execution level
3. Display level
4. Variable No. and
details
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
2. Monitor (Operation) Screens
Display item
This displays the machining program No., sequence No. and block No.
currently being executed.
When executing a subprogram, the subprogram numbers are displayed.
This displays the nest level of the subprogram control called by the user
macro.
0 : Not in user macro call state
1 : User macro call level 1
2 : User macro call level 2
3 : User macro call level 3
4 : User macro call level 4
This displays the nest level of the local variable displayed in the area.
This displays the local variable No. and its details. The alphabetic
character before the local variable No. is the argument code. G, L, N, O
and P cannot be used as arguments, and thus do not display.
There are 33 local variables (1 to 33) for each user macro subprogram
call level.
If the variable data is cleared, the data display area is blank. If the data
has many digits, (if the data has 6 digits above the decimal point, or 4
digits below the decimal point), an exponential is displayed.
search engine
Details
I – 96