Table of Contents
Advertisement
4.2.2 Designating a random line
When the menu key
the cursor can be moved to that line. This is handy when displaying or editing a program having many
lines.
(1) Operation method
4.2.3 Rewriting data
(1) Operation method
Downloaded from
ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
is pressed and a random line No. is input, that line can be displayed, and
Line desig
1)
Press the menu key
.
Line desig
2)
Input the line No.
8
INPUT
1)
Move the cursor to the
position of the data to be
rewritten.
2)
Set the data.
3)
When one line of setting is
completed, press the
key.
(Note 1) The data is not saved in the NC memory at this point. (It will be erased when the
power is turned OFF.)
To save the data in the NC memory, press
The method for saving with the
parameter "370040 Program save type".
(Note 2) Up to 256 characters can be set in one line.
search engine
4. Edit Screens
The menu is highlighted.
The program displays with the set line No. at the head.
The cursor moves to the head.
The message "Editing" appears when setting is started.
The data is set from the position of the cursor. Data at
the area is overwritten.
The cursor moves one space to the right as the data is
set.
EOB ( ; ) is added to the set data and the data is fixed.
When newly creating data, the cursor moves to the
INPUT
head of the next line.
When changing existing data, etc., the cursor does not
move.
INPUT
I – 245
.
Save file
key can be selected with the operation
Advertisement
Table of Contents
