Mitsubishi Electric MELDAS 600M Series Instruction Manual page 116

2.9.1 Turning PLC switches ON/OFF
(1) Operation method (To turn switch "#6 Program restart" ON)
(Note 1) If the Setting valid menu or
(Note 2) The PLC switch setting mode will be canceled when another screen is opened.
(Note 3) The cursor will not appear in modes other than the PLC switch setting mode. If the menu
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
2. Monitor (Operation) Screens
1)
Press the menu key
Setting valid .
2)
Press "Y" or INPUT .
3)
Press the cursor keys
and to move the
↑ ↓
cursor to "#6".
4)
Press the menu key
To turn OFF, press the menu
key .
OFF
mode, the PLC switch setting mode will be canceled.
key ON or OFF is pressed in this state, a message indicating that the mode is not the
PLC switch setting mode will appear.
search engine
A message confirming the start of PLC switch setting
will appear. The menu key Setting valid will be
highlighted.
The PLC switch setting mode will be entered. The
cursor will appear at the PLC switch No. position. The
menu keys ON and
The #6 number is highlighted.
# Name
1 Auto restart
2 * Protect delete
3 Manual/Absolute
4 Optional stop
*
5 Handl interrupt
Program restart
6
7
The "#6 Program restart" switch turns ON, and a ∗ mark
.
ON
appears.
# Name
1 Auto restart
2 * Protect delete
3 Manual/Absolute
4 Optional stop
*
Handl interrupt
5
*
Program restart
6
7
A ∗ mark appears.
key is pressed again during the PLC switch setting
I – 101
will appear normally.
OFF