Mitsubishi Electric MELDAS 600M Series Instruction Manual page 59

2.3.2 Setting the incremental time
Each data for the incremental time display is set.
(1) Operation method
(Note) If the
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
2. Monitor (Operation) Screens
1)
Select display area 1, and
press the menu key
.
Run-out time
2)
Press the menu key
.
Time setting
3)
Set the current data (ex.;
"1997.07.03"), and press the
key.
INPUT
4)
Set the data for each item,
and press the
INPUT
menu is pressed again or the
Time setting
setting mode, the time setting is canceled.
search engine
The incremental time appears in display area 1.
The time setting mode is entered.
The cursor appears at the "#1 Date" position in the
incremental time display.
Run-out time display
#1 Date
2 Time
3 Power ON
4 Auto oper
5 Auto strt
6 Ext time1
7 Ext time2
"1997.07.03" appears at "#1 Date", and the cursor
moves to "#2 Time".
Run-out time display
#1 Date
2 Time
3 Power ON
4 Auto oper
5 Auto oper
6 Ext time1
7 Ext time2
When the "#7 Ext time2" setting is finished, the cursor
disappears, and the time setting ends.
key.
(The menu highlight returns to normal.)
I – 44
The cursor
appears at "#1
1996.01.23
Date".
12:34:56
1234:59:59
1234:59:59
1234:59:59
1234:59:59
1234:59:59
The cursor
1997.07.03
appears at "#2
12:34:56
Time".
1234:59:59
1234:59:59
1234:59:59
1234:59:59
1234:59:59
key is pressed during the time