Toshiba GR200 Series Instruction Manual page 909

The user can clear the intervals (OT1 to OT4) by key-operation of the "Operation time"
sub-menu Figure 4.8-39 or operation from the remote-end. See chapter
Monitoring sub-menu
Operation Time
10:48
DPSY1-OT
DPSY2-OT
_DPOS1-OT
DPOS2-OT
DPOS3-OT
DPOS4-OT
Signal names and numbers
(i)
Signal Number Signal Name
512001 7003006D0D DEV01_RESET_REQ
512001 7003016D0D DEV02_RESET_REQ
512001 7003026D0D DEV03_RESET_REQ
512001 7003486D0D DEV48_RESET_REQ
Setting name
(ii)
Table 4.8-28 Setting of operation time function in DPOSxx
Setting Name Description
DPOSxx-OPETMEN Activation of the operation time measurement in DPOSxx
.
1/26
>
CANCEL
>
>
>
>
ENTER
>
Figure 4.8-39 Operation time sub-menu
Table 4.8-27 Mapping points
Description
DPOS01 operation time reset command received (Mapping Data)
DPOS02 operation time reset command received (Mapping Data)
DPOS03 operation time reset command received (Mapping Data)
DPOS72 operation time reset command received (Mapping Data)
- 886 -
6F2S1914 (0.49)
DPOS1-OT1
10:48 1/5
DPOS_SYN-Dev1-OT1
******.*** ms
DPOS_SYN-Dev1-OT2
******.*** ms
DPOS_SYN-Dev1-OT3
Default Setting item or value
On
GRL200 (Soft 033 & 037)
User interface:
Off / On