Toshiba GR200 Series Instruction Manual page 477

Line differential protection ied

Hide thumbs Also See for GR200 Series:

Table of Contents

TPAR logic – settings (TTPAR1, TRR1)

The TPAR logic for CB#1 and CB#2 are illustrated in Figure 2.34-19. To operate in the TPAR

mode in the CB#1, the VCHK function provides a permission signal for the TPAR logic. The

dead timer [TTPAR1] is required to set in the logic. The user should set the [TRR1] to have the

coordination with the [TTPAR1].

From VCHK function

From Initiation

ARC1-S1 IN-PROG

ARC1 IN-PROG

From Condition in CB#1

ARC1_TPAR_COND

From Initiation

ARC2-S1 IN-PROG

From Condition in CB#2

ARC2_TPAR_COND

From Reclose sequence

Note: Settings [TTPAR1_SUB], [TTPAR2_SUB] are not required as in the default.

Figure 2.34-19 ARC1 TPAR and ARC2 TPAR

0.01 – 300.00 s

TPAR1_SUB_START

0.01 – 300.00 s

TPAR1_SUB_COND

0.01 – 300.00 s

TPAR2_SUB_START

0.01 – 300.00 s

TPAR2_SUB_COND

0.01 – 310.00 s

0.01 – 310.00 s

6F2S1914 (0.49)

For Issuing for CB

For Issuing for CB

GRL200 (Soft 033 & 037)

Chapters

Table of Contents