Toshiba GR200 Series Instruction Manual page 474

Line differential protection ied

Hide thumbs Also See for GR200 Series:

Table of Contents

Shot counter- setting (SHOTNUM-TEST)

Figure 2.34-16 illustrates the shot counter logic. Scheme switch [SHOTNUM-TEST] is provided

for the shot number test. For example, if two shots are required for the test, set S2 for the

[SHOTNUM-TEST]. Table 2.34-11 shows the counting up in the shot counter logic. Note that

the ARC function reaches the final trip stage if the counter is over.

Shot1 for CB#1

Shot for CB#2

Initiation for CB#1

ARC1 IN-PROG

ARC1 NOT_IN-PROG

Initiation for CB#2

ARC2 IN-PROG

ARC2 NOT_IN-PROG

Shot2–Shot5 for CB#1

SHOTNUM-TEST

Input signals for

Shot counter logic

Second cycle

Fourth cycle

Figure 2.34-16 Shot counter

Table 2.34-11 Counting up in Shot counter logic

Output signals for SHOT1–5 logics

6F2S1914 (0.49)

GRL200 (Soft 033 & 037)

To Fault record

Initiation for CB#1

Initiation for CB#2

Chapters

Table of Contents