Toshiba GR200 Series Instruction Manual page 882

Signal Number Signal Name
.... ....
512001 8203481F60 DPOS72_F_BI_ERR
Table 4.8-9 PLC Monitoring points (On/Off output-signal for BIO)
Signal Number Signal Name
512001 8A03011DC4 DPOS01_FSL_BO_FLG
512001 8A03021DC4 DPOS02_FSL_BO_FLG
512001 8A03031DC4 DPOS03_FSL_BO_FLG
.... ....
512001 8A03481DC4 DPOS72_FSL_BO_FLG
512001 8603011DC6 DPOS01_OSL_BO_FLG
512001 8603021DC6 DPOS02_OSL_BO_FLG
512001 8603031DC6 DPOS03_OSL_BO_FLG
.... ....
512001 8603481DC6 DPOS72_OSL_BO_FLG
Setting names
(ix)
Note: The "xx" within "DPOSxx" represents the DPOS function number. (e.g., if DPOS03
is considered, the "xx" is equal to "03". The numbers used for "xx" can be
represented from "01" to "72".)
Setting Name
DPOSxx-CTREN
DPOSxx-LGSLFFCT
DPOSxx-CTRAHMI
Description
....
BI connection error detected(DPOS72)
Description
DPOS01 select (Off) command for Binary Output.
DPOS02 select (Off) command for Binary Output.
DPOS03 select (Off) command for Binary Output.
....
DPOS72 select (Off) command for Binary Output.
DPOS01 select (ON) command for Binary Output.
DPOS02 select (ON) command for Binary Output.
DPOS03 select (ON) command for Binary Output.
.....
DPOS72 select (On) command for Binary Output.
Table 4.8-10 Settings for select logics
Description
Activate control function of DPOSxx
Logic selector for select condition in DPOSxx
Activate local panel control in DPOSxx
- 859 -
6F2S1914 (0.49)
Default Setting item or value
On Off / On
Fixedlogic Fixedlogic / PLC
SBO DIR/ SBO
GRL200 (Soft 033 & 037)