Toshiba GR200 Series Instruction Manual page 732

Signal names and number
(iv)
Signal Number Signal Name
511001 7002016D09 DEV01_3PH_REQ
511001 7002016D0A DEV01_APH_REQ
511001 7002016D0B DEV01_BPH_REQ
511001 7002016D0C DEV01_CPH_REQ
511001 7002026D09 DEV02_3PH_REQ
511001 7002026D0A DEV02_APH_REQ
511001 7002026D0B DEV02_BPH_REQ
511001 7002026D0C DEV02_CPH_REQ
Signal Number Signal Name
511001 8A02011F88 DPSY01_SLD_CSCN
511001 3202011D20 DPSY01_CNT_VAL
511001 3202011D24 DPSY01A_CNT_VAL
511001 3202011D28 DPSY01B_CNT_VAL
511001 3202011D2C DPSY01C_CNT_VAL
511001 8A02021F88 DPSY02_SLD_CSCN
511001 3202021D20 DPSY02_CNT_VAL
511001 3202021D24 DPSY02A_CNT_VAL
511001 3202021D28 DPSY02B_CNT_VAL
511001 3202021D2C DPSY02C_CNT_VAL
Table 4.2-26 PLC connection points for control hierarchy
Signal Number Signal Name
511001 800201ED5A DPSY01IN_TMP_47
511001 800202ED5A DPSY02IN_TMP_47
Setting name
(v)
Setting Name Description
DPSYxx-CNTS Mode selection of the counter in DPSYxx
Table 4.2-24 Mapping points
Description
DPSY01 change command received.(Mapping Data) for 3-phase counter value
DPSY01 change command received.(Mapping Data) for phase-A counter value
DPSY01 change command received.(Mapping Data) for phase-B counter value
DPSY01 change command received.(Mapping Data) for phase-C counter value
DPSY02 change command received.(Mapping Data) for 3-phase counter value
DPSY02 change command received.(Mapping Data) for phase-A counter value
DPSY02 change command received.(Mapping Data) for phase-B counter value
DPSY02 change command received.(Mapping Data) for phase-C counter value
Table 4.2-25 PLC monitoring points and output results
Description
DPSY01 select command for Binary Output.
DPSY01 operation counter value
DPSY01 phase-A operation counter value
DPSY01 phase-B operation counter value
DPSY01 phase-C operation counter value
DPSY02 select command for Binary Output.
DPSY02 operation counter value
DPSY02 phase-A operation counter value
DPSY02 phase-B operation counter value
DPSY02 phase-C operation counter value
Description
DPSY01 CNT control hierarchy condition
DPSY02 CNT control hierarchy condition
Table 4.2-27 Setting for pulse counter in DPSYxx
Default
*user-preferred
- 709 -
6F2S1914 (0.49)
Setting item or value
NA / C-Close / C-Open / C-OnOff
GRL200 (Soft 033 & 037)
M/O
M
M