Toshiba GR200 Series Instruction Manual page 393

Line differential protection ied

Hide thumbs Also See for GR200 Series:

Table of Contents

the ZS/ZG protections, see Chapter

Note: Output signals are provided for respective relays when the relays are available.

Appendix: Ordering

Note: AMF feature is used for the test. To generate the AMF signal, see chapter

interface: Test-submenu

If a PLC signal is injected at the PLC connection point "VTF_BLOCK", the operation of

the VTF function is blocked. The user can program to inject an external signal for the failure

detection using the PLC connection point EXTERNAL_VTF; the VTF_DETECT signal is

generated when the signal is injected at the EXTERNAL_VTF.

Relay application: Distance protection,

whether the relays are supplied into the IED.

6F2S1914 (0.49)

GRL200 (Soft 033 & 037)

Chapters

Table of Contents