Toshiba GR200 Series Instruction Manual page 791

Connection points in PLC logic
◆
SOFTSW(Function ID:522001)
Element ID
850A04EDE1
820A04ED50
860A05EDE0
850A05EDE1
820A05ED50
860A06EDE0
850A06EDE1
820A06ED50
.....
860A3FEDE0
850A3FEDE1
820A3FED50
860A40EDE0
850A40EDE1
820A40ED50
Note: In the table above, the user will only find Element IDs and their names for the 1
device, but a 2
have omitted the Element IDs and their names for the other devices to improve
readability. Use the rule described below when the user wishes to obtain the
Element IDs and their names for the other devices.
Rule: The same types of signal monitoring points are provided in every device;
hence, the user can find the same ones for all of the other devices. For
example, when the user wishes to find the "S4301_EC_LCD" point for the
2
nd
"S4301_EC_LCD". The user can obtain the ID value of "S4302_EC_LCD" by
using the following steps:
Name Description
S4301_CHG_TO_ON SOFT 43 switch1 change to on
S4301_CTRL_RIGHT SOFT 43 switch1 control right from PLC
S4302_CHG_TO_OFF SOFT 43 switch2 change to off
S4302_CHG_TO_ON SOFT 43 switch2 change to on
S4302_CTRL_RIGHT SOFT 43 switch2 control right from PLC
S4303_CHG_TO_OFF SOFT 43 switch3 change to off
S4303_CHG_TO_ON SOFT 43 switch3 change to on
S4303_CTRL_RIGHT SOFT 43 switch3 control right from PLC
.... .....
S4360_CHG_TO_OFF SOFT 43 switch60 change to off
S4360_CHG_TO_ON SOFT 43 switch60 change to on
S4360_CTRL_RIGHT SOFT 43 switch60 control right from PLC
S4361_CHG_TO_OFF SOFT 43 switch61 change to off
S4361_CHG_TO_ON SOFT 43 switch61 change to on
S4361_CTRL_RIGHT SOFT 43 switch61 control right from PLC
and other devices are also provided in the SOFTSW function. We
nd
device, use the description of "S4302_EC_LCD" in place of
Step 1 Find the element ID for S4301_EC_LCD (i.e.,
"8C00041F45")
Step 2 Identify the number at the fifth digit from the ID. (i.e., "4")
Step 3 Choose a new device number. (i.e., pick the number "2" for
the 2 device)
nd
Step 4 Replace the number that occurs at the fifth digit with the
new device number. (i.e., get new ID "8C00051F45" of
"S4302_EC_LCD") The ID is expressed in hexadecimal
notation. Thus, the user must change the device number
from decimal notation to hexadecimal notation.
- 768 -
6F2S1914 (0.49)
st
GRL200 (Soft 033 & 037)