Show Flexible-Tier-Sub-Pools - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.2 Flexible Tier Management > show flexible-tier-sub-pools

show flexible-tier-sub-pools

This command displays an overview list of the Flexible Tier Sub Pools (FTSPs) that are already registered in the
ETERNUS DX Disk storage system and detailed information for a specified FTSP. When the FTSP number or the
FTSP name is specified, information on the specified FTSP and the RAID group (RLU) that are registered in the
specified FTSP is displayed. When the FTSP number or the FTSP name is omitted, a list of the FTSPs that are
already registered in the ETERNUS DX Disk storage system is displayed.
■ Syntax
show flexible-tier-sub-pools [-ftsp-number
■
Parameter
-ftrp-number
or
-ftrp-name
■ Output
When the parameter is omitted:
#Flexible Tier Sub Pool
#No. Name
# 1 FTSP001
# 2 FTSP002
A B
A: Flexible Tier Sub Pool number
B: Flexible Tier Sub Pool name
C: Assigned Flexible Tier Pool number
D: Assigned Flexible Tier Pool name
E: Disk attribute that composes the Flexible Tier Sub Pool (Online/Nearline/SSD/SED)
F: RAID Level
G: Flexible Tier Sub Pool status
H: Total capacity of the Flexible Tier Sub Pool
I: Used capacity of the Flexible Tier Sub Pool
Optional. This parameter specifies the FTSP identifier to display detailed information for.
Multiple parameters can be selected in a single command.
If omitted, a list of all the FTSPs that are already registered in the ETERNUS DX Disk storage
system is displayed.
Flexible Tier Pool
No. Name
0 FTRP000
1 FTRP001
C D
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
ftsp_number ftsp_name
| -ftsp-name
Disk RAID Status
Attribute Level
Online RAID1+0 Available 500 GB
SSD RAID1+0 Available 500 GB
E F G
101
]
Total Used
Capacity Capacity
250 GB
250 GB
H I
P2X0-1030-09ENZ0