Set Advanced-Copy-License - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.2 Advanced Copy Management > set advanced-copy-license

set advanced-copy-license

There are four types of copy licenses: a "legitimate version", a "trial version", a "VAAI version" and a "free"
version". The "free" license is available only for the ETERNUS DX80 S2/DX90 S2. If an attempt is made to
register a legitimate version license that is lower in software level than the already registered legitimate
license in the ETERNUS DX Disk storage system, an error occurs. The trial period of an already registered trial
version license can be changed only once by registering another trial version license. If a second attempt is
made, an error occurs. In addition, when a trial version license key is registered again, the trial period may be
shortened due to the valid period of the license key.
■
Syntax
set advanced-copy-license {-key
■ Parameter
-key
or
-type
■ Example(s)
The following example registers an Advanced Copy license:
CLI> set advanced-copy-license -key 1928569802345721
The following example registers a "free" Advanced Copy license:
CLI> set advanced-copy-license -type free
key
| -type { free | vaai} }
This parameter specifies the Advanced Copy license key or the license type. The license key is
16 letters (fixed). Specify "free" for a free license. The "VAAI mode" version and "free" version
license types do not require a license key.
free Free version (only for the ETERNUS DX80 S2/DX90 S2)
vaai VAAI mode version
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
385
P2X0-1030-09ENZ0