Set Lu-Qos-Group - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > set lu-qos-group

set lu-qos-group

This command performs detailed settings of the LU QoS Group.
■
Syntax
set lu-qos-group -lu-qos-group
■ Parameter
-lu-qos-group
-lun
-bandwidth-limit
lu_qos_group_number
This parameter specifies the LU QoS Group number to set for LU QoS.
Any value between 0 to 543 for ETERNUS DX80/DX90 S2, ETERNUS DX410 S2/DX440 S2, and
ETERNUS DX8100 S2, or between 0 and 2175 for ETERNUS DX8700 S2, can be specified.
This parameter specifies the Host-LUN that is to be set. Any value between 0 and 1023 can be
specified. Two or more Host-LUNs can be specified.
Example: -lun 1,2 -lun 0-10 -lun 1,2-9
This parameter specifies the performance limit value for the Host-LUN. Any value between 0
(unlimited) and 15 (Max) can be specified. Two or more values can be specified. When two or
more values are specified, the same number of values as the Host-LUNs that are specified by
the "-lun" parameter must be specified.
Example: -bandwidth-limit 1,2
-bandwidth-limit 0-10
-bandwidth-limit 1,2-9
The same "-bandwidth-limit" parameter value can be specified for multiple "-lun" parameter
values.
Example: -lun 1,2,4 -bandwidth-limit 1
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
luns
-lun -bandwidth-limit
329
bandwidth-limit
P2X0-1030-09ENZ0