Start Balancing-Flexible-Tier-Pool - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.2 Flexible Tier Management > start balancing-flexible-tier-pool

start balancing-flexible-tier-pool

This command starts evenly relocating the Flexible Tier Volumes (FTVs) among RAID groups.
Specify the FTRP that is to be balanced.
■ Syntax
start balancing-flexible-tier-pool {-ftrp-number
■ Parameter
-ftrp-number
or
-ftrp-name
■
Example(s)
The following example starts balancing FTRP01:
CLI> start balancing-flexible-tier-pool -ftrp-name FTRP01
This parameter specifies the FTRP to which the FTV to start balancing is allocated. For details,
refer to "1.2.6 Flexible Tier Pool Syntax" (page
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
ftrp_number
| -ftrp-name
21).
107
ftrp_name
}
P2X0-1030-09ENZ0