Fujitsu ETERNUS DX80 S2 Cli User's Manual page 573

Chapter 4 Function/System Settings and Display
4.4 Miscellaneous > set power-synchronization
■ Example(s)
The following example sets how the shutdown function interacts with the external sensor. Both controller
modules are selected, the shutdown time is specified as 5 minutes, and the input signal that signals power
outage is specified as positive.
CLI> set power-synchronization -cm all -shutdown-time 5 -power-fail-signal positive
573
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0