Fujitsu ETERNUS DX80 S2 Cli User's Manual page 698

Appendix A Error Messages
Message
number
E0320
E0330
E0331
E0332
E0333
E0334
E0335
E0336
E0337
E0340
E0341
E0342
E0343
E0344
E0345
E0346
E0347
E0348
Syntax error in REC path information. (Total number of links over upper limit)
A syntax error was detected in the specified REC path information file. Specifically, the total number of
linkages has reached its limit. Refine the result to obtain the necessary information.
Flexible tier mode has already been valid.
The Flexible Tier mode is already enabled.
Flexible tier mode is not valid.
The Flexible Tier mode is disabled.
One or more flexible tier pools exist.
Flexible Tier Pools exist. Check whether Flexible Tier Pools exist by using the "show flexible-tier-pools"
command.
Cannot format Flexible Tier Pool.
The specified Flexible Tier Pool cannot be formatted. Check the Flexible Tier Pool by using the "show
flexible-tier-pools" command.
RAID Migration cannot be set to the specified volume.
RAID Migration cannot be set for the specified volume. Check the volume by using the "show volumes"
command.
RAID Migration cannot be set to the specified Flexible Tier Pool.
RAID Migration cannot be set for the specified Flexible Tier Pool volume. Check the Flexible Tier Pool by
using the "show flexible-tier-pools" command.
RAID Migration cannot be set to the specified Thin Provisioning Pool.
RAID Migration cannot be set for the specified Thin Provisioning Pool. Check the Thin Provisioning Pool by
using the "show thin-pro-pools" command.
The specified Flexible Tier Pool does not have a Flexible Tier Sub Pool.
A Flexible Tier Sub Pool does not exist in the specified Flexible Tier Pool. Check whether Flexible Tier Sub
Pools exist by using the "show flexible-tier-pools" command.
Host-LU QoS mode has already been valid.
The Host-LU QoS mode is already enabled.
Host-LU QoS mode has already been invalid.
The Host-LU QoS mode is already disabled.
The time out occurred.
A timeout occurred during AIS Connect processing. Check the network status.
The network is not normal.
The AIS Connect network is not in normal status. Check the network status.
The time out occurred in the network.
A timeout occurred in the AIS Connect network. Check the network status.
The network of AIS Connect server is unreachable.
The network of the AIS Connect server cannot be accessed. Check the network status.
The AIS Connect server is unreachable.
The AIS Connect server cannot be accessed. Check the network status.
The AIS Connect server refused the connection.
The AIS Connect server refused the connection. Check the network status.
The AIS Connect server reset the connection.
The AIS Connect server reset the connection. Check the network status.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
Message
Countermeasure for the error
698
P2X0-1030-09ENZ0