Set Odx-Mode - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.4 Volume Management > set odx-mode

set odx-mode

This command specifies the operation mode for the Offloaded Data Transfer function.
■
Syntax
set odx-mode -mode {enable|disable}
■ Parameter
-mode
■ Example(s)
The following example enables the Offloaded Data Transfer function:
CLI> set odx-mode -mode enable
The following example disables the Offloaded Data Transfer function:
CLI> set odx-mode -mode disable
This parameters specifies whether to enable or disable the Offloaded Data Transfer function.
enable The Offloaded Data Transfer function is enabled.
disable The Offloaded Data Transfer function is disabled.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
187
P2X0-1030-09ENZ0