Chapter 4 Function/System Settings and Display
4.4 Miscellaneous > create sed-key-group
-slave-server-id
■
Example(s)
The following example sets up the key group:
CLI> create sed-key-group -name key-group1 -machine-group-name machine_group1 -security-level high
-recovery-mode auto -period 6 -master-server-id 1 -slave-server-id 2
Optional. This parameter specifies the key server ID for the slave server. 1 or 2 can be specified.
When the slave server is not used, specify consecutive double quotations (""). If omitted, the
slave server is not set. Use the same setting as the slave server that is set in the key server.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
595
P2X0-1030-09ENZ0