Show Snmp-User - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 4 Function/System Settings and Display
4.3 Network Management > show snmp-user

show snmp-user

This command displays a list of the registered SNMP users.
■
Syntax
show snmp-user [{-name
■ Parameter
-user
or
-number
■ Output
# No. User name
# 1 "FooVar1"
A B
A: User number
B: User name
C: Authentication method or disable
D: Encryption enable or disable
E: MIB view name
■ Example(s)
The following example displays a list of all the registered SNMP users:
CLI> show snmp-user
No. User name
1 "FooVar1"
2 "FooVax"
3 "BUZZ"
4 "snmpuser1"
5 "snmpuser2"
The following example lists the SNMP users named "Buzz":
CLI> show snmp-user -user BUZZ
No. User name
3 "BUZZ"
user_name
|-number
Optional. This parameter specifies the user name or user number to display SNMP user entry.
When using "-number", one or more users can be specified using "," or "-". If this parameter is
omitted, all the registered SNMP users are listed.
Example:
-name Foo
-number 1
-number 2,3
-number 1-4
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
numbers
}]
Authentication Encryption
MD5 enable
C D
Authentication Encryption
MD5 enable
SHA disable
disable disable
MD5 enable
SHA enable
Authentication Encryption
disable disable
489
MIB-view
"xview4"
E
MIB-view
"xview4"
"xview5"
"view13"
"View-exmib"
MIB-view
P2X0-1030-09ENZ0