Set Raid-Group - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.3 RAID Group Management > set raid-group

set raid-group

This command changes the information of an existing RAID group.
■
Syntax
set raid-group {-rg-number
[-assigned-cm {0|1|cm0cpu0|cm0cpu1|cm1cpu0|cm1cpu1| cm2cpu0|
cm2cpu1|cm3cpu0|cm3cpu1| cm4cpu0|cm4cpu1|cm5cpu0|cm5cpu1|
cm6cpu0|cmc6pu1|cm7cpu0|cm7cpu1|auto}]
[-key-group {enable|disable}]
■
Parameter
-rg-number
or
-rg-name
-name
-assigned-cm
rg_number
| -rg-name
This parameter specifies RAID group identifiers.
Only one RAID group identifier can be specified when changing a RAID group alias name. One
or more RAID group identifiers can be specified when changing the assigned CM. For details,
refer to "1.2.8 RAID Group Syntax" (page
Optional. This parameter specifies the new RAID group name. If this parameter is omitted, the
name is not changed. For details, refer to
Optional. This parameter specifies the assigned controller module number of the RAID group. If
"auto" is specified, the fixed controller, which is calculated automatically by the system, is
assigned. If this parameter is omitted, the assigned CM is not changed.
For the ETERNUS DX80 S2/DX90 S2:
0 Controller module#0
1 Controller module#1
auto Automatically (default)
For the ETERNUS DX410 S2/DX440 S2 and ETERNUS DX8100 S2:
cm0cpu0 Controller module#0 CPU#0
cm0cpu1 Controller module#0 CPU#1
cm1cpu0 Controller module#1 CPU#0
cm1cpu1 Controller module#1 CPU#1
auto Automatically (default)
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
rg_name name
} [-name
22).
"1.2.4 Alias Name Syntax" (page
114
]
20).
P2X0-1030-09ENZ0