Show Bad-Data-Info - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 5 Information Settings and Display
5.3 Maintenance > show bad-data-info

show bad-data-info

This command displays either the bad data information for all of the volumes or for the specified volume(s).
■
Syntax
show bad-data-info [{-volume-number
■ Parameter
-volume-number
or
-volume-name
■ Output
# Volume
# No. Name
# 1 VOL001
A B
A: Volume number
B: Volume name
C: Volume type
D: Start offset LBA of the bad data
E: Number of LBAs of the bad data
F: Error type
■ Example(s)
The following example displays bad data information for volume number #1:
CLI> show bad-data-info -volume-number 1
Volume
No. Name
1 VOL001
The following example displays bad data information for the volumes named "VOL001" and "VOL012":
CLI> show bad-data-info -volume-name VOL001, VOL012
Volume
No. Name
1 VOL001
12 VOL012
volume_numbers
Optional. This parameter specifies the volume identifiers to display bad data. One or more
parameters can be specified. For details, refer to
Volume Type Error LBA
Standard 0x0123456789ABCDEF
C D
Volume Type Error LBA
Standard 0x0123456789ABCDEF
Volume Type Error LBA
Standard 0x0123456789ABCDEF
Standard 0x0000000076543210
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
| -volume-name
"1.2.9 Volume Syntax" (page
LBA Count
0xFEDCBA9876543210
E
LBA Count Error Type
0xFEDCBA9876543210 contiguity
LBA Count Error Type
0xFEDCBA9876543210 contiguity
0x0000000089ABCDEF dispersion
656
volume_names
}]
22).
Error Type
contiguity
F
P2X0-1030-09ENZ0