Fujitsu ETERNUS DX80 S2 Cli User's Manual page 509

Chapter 4 Function/System Settings and Display
4.3 Network Management > set email-notification
-partial-mode
-partial-size Optional. This parameter is only available for the ETERNUS DX Disk storage system that does
-send-log
-iom-log
-customer-info
Optional. This parameter is only available for the ETERNUS DX Disk storage system that does
not have the REMCS support function. If this parameter is specified for an ETERNUS DX Disk
storage system that has the REMCS support function, this command terminates. This
parameter specifies the mode to divide e-mail into parts when sending. If omitted, the
existing setting is not changed. The default value is disabled (e-mails are not divided).
enable Partial e-mail mode is enabled.
disable Partial e-mail mode is disabled (default).
not have the REMCS support function. If this parameter is specified for an ETERNUS DX Disk
storage system that has the REMCS support function, this command terminates. This
parameter specifies the part size of an e-mail. It is available when "-partial-mode" is enabled,
and any mode can be specified. Between 64kb and 6400kb should be specified for the value
(between 64KB and 6400KB). "kb" must be specified after the number. If omitted, the existing
setting is not changed. The ETERNUS DX Disk storage system default value is 64KB (the size of
each e-mail is 64KB).
Optional. This parameter is only available for the ETERNUS DX Disk storage system that does
not have the REMCS support function. If this parameter is specified for an ETERNUS DX Disk
storage system that has the REMCS support function, this command terminates. This
parameter specifies whether the E-mail log notification function is enabled or not. If omitted,
the existing setting is not changed. The default value is disable.
enable Sending the E-mail log is enabled.
disable Sending the E-mail log is disabled (default).
Optional. This parameter is only available for the ETERNUS DX Disk storage system that does
not have the REMCS support function. If this parameter is specified for an ETERNUS DX Disk
storage system that has the REMCS support function, this command terminates. This
parameter specifies whether the I/O module logs are included. If omitted, the I/O module logs
are included.
enable The I/O module log is included (default).
disable The I/O module log is not included.
Optional. This parameter is only available for the ETERNUS DX Disk storage system that does
not have the REMCS support function. If this parameter is specified for an ETERNUS DX Disk
storage system that has the REMCS support function, this command terminates. This
parameter specifies whether to include customer information in the exported logs. If this
parameter is omitted, customer information is included in the logs.
enable Customer information is included in the logs (default).
disable Customer information is not included in the logs.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
509
P2X0-1030-09ENZ0