Show Affinity-Groups - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.5 Host Interface Management > show affinity-groups

show affinity-groups

This command displays a list of existing affinity groups. If there are no parameters specified, the summary list
of all the existing affinity groups is displayed. If affinity groups are specified, then the details of the associated
volumes and LUNs are displayed.
Multi-group volume information, which indicates whether or not the same volume is defined for multiple
affinity groups, is a status flag.
■ Syntax
show affinity-groups [-ag-number
■
Parameter
-ag-number
or
-ag-name
■ Output
When the parameter is specified, the details of the specified affinity group are displayed.
# Affinity Group
# No. Name
# 6 AG006
A B
A: Affinity group number
B: Affinity group name
C: It shows whether or not the same volume identifier is defined between affinity groups.
If the same definitions exist, "Yes" is displayed in target affinity groups. Otherwise, "No" is displayed.
ag_numbers
Optional. This parameter specifies the affinity group identifiers that will be displayed in
detail. One or more parameters can be specified. If omitted, a summary of all the existing
affinity groups will be displayed.
Multi-Group
Volumes
Yes
C
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
ag_names
| -ag-name
258
]
P2X0-1030-09ENZ0