Fujitsu ETERNUS DX80 S2 Cli User's Manual page 597

Chapter 4 Function/System Settings and Display
4.4 Miscellaneous > set sed-key-group
-slave-server-id
■ Example(s)
The following example modifies the key group:
CLI> set sed-key-group -name key-group2 -machine-group-name machine_group2 -security-level low -recovery
-mode manual -period "" -master-server-id 2 -slave-server-id 1
Optional. This parameter specifies the key server ID for the slave server. 1 or 2 can be specified.
When the slave server is not used, specify consecutive double quotations (""). If omitted, the
existing setting is not changed. Use the same setting as the slave server that is set in the key
server.
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
597
P2X0-1030-09ENZ0